HDMI Output Payment Terminal Board with 4G LTE Modem, WF-SPT-11

TL;DR: HDMI Output Payment Terminal Board with 4G LTE Modem

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Italy. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Italy importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC builds smart payment terminal Android motherboards for the unattended and attended ends of the same market. A international market buyer can take a countertop configuration for a shop counter and an outdoor configuration for a charging pillar from one supplier, on one Android baseline, with one SDK. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Italy importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Italy Buyers

Italy integrators are usually carrying an installed estate when they come to AndroidSBC. The new board has to live next to older terminals, older peripherals and older middleware, which puts the serial port, the RS485 lane and the legacy boot path back on the specification sheet.

Key handling is the fifth problem. Payment hardware shipped into Italy has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the international market delivery file. Every Italy programme that reaches volume at AndroidSBC goes through the 7th gate: 63800 boards qualified on the bench, the compliance file matched to the configuration, and only then a production slot on the Genoa - Shanghai lane for international market.

Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards

For international market buyers the honest comparison is total cost of integration, not unit price. A cheaper board without a printer profile, a scan mapping or an OTA path costs more by the time the estate is live in Italy.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Italy integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The multimedia payment terminal build with customer screen is being pulled into programmes that did not exist five years ago - EV charging, parcel lockers, stadium ticketing, self-checkout - and each one arrives in Italy with its own certification calendar and its own international market install window.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

For international market the practical conclusion is that a terminal programme is a documentation programme. Growth is available to anyone; margin is available to the integrator whose board supplier ships the file with the pallet in Italy.

WF-SPT-11 Application Scenarios

The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-09 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

AndroidSBC publishes these three tracks because Italy partners ask the same question in every first call: how much of the work do we take, and how much do you take.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The Italy partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?

Answer: Yes. The multimedia payment terminal build with customer screen is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in international market.

Which configurations are available in the WF-SPT family for Italy buyers?

Answer: AndroidSBC ships twelve configurations including the H618 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in Italy.

What payment scheme certification support does AndroidSBC provide for Italy?

Answer: AndroidSBC prepares CE marking with AGCOM radio interface notification documentation and AGCOM conformity files alongside the production order, so the international market acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for Italy?

Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Italy.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the international market estate.

How are firmware updates delivered to aan Italy device estate after deployment?

Answer: AndroidSBC manages the Italy estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the international market operations team.

What shipping terms does AndroidSBC support for Italy orders?

Answer: The Italy lane runs weekly into Port of Genoa, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.

Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation

AndroidSBC is taking new Italy partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Italy and more than 60 markets. international market enquiries for samples, price lists and certification files are answered within one working day.